Visit Audio Recordings for the audio version of this section.
- Describe methods to manage .
- Describe the terms and relationships of budget factors used in earned value analysis.
- Calculate and interpret budget and schedule .
- Calculate and interpret the and the .
- Calculate and interpret estimates to complete the project.
- Calculate the revised final budget.
Projects seldom go according to plan in every detail. It is necessary for the project manager to be able to identify when costs are varying from the budget and to manage those variations.
MANAGING CASH FLOW
If the total amount spent on a project is equal to or less than the amount budgeted, the project can still be in trouble if the funding for the project is not available when it is needed. There is a natural tension between the financial people in an organization, who do not want to pay for the use of money that is just sitting in a checking account, and the project manager, who wants to be sure that there is enough money available to pay for project expenses. The financial people prefer to keep the company’s money working in other investments until the last moment before transferring it to the project account. The contractors and have similar concerns, and they want to get paid as soon as possible so they can put the money to work in their own organizations. The project manager would like to have as much cash available as possible to use if activities exceed budget expectations.
Most projects have something unexpected occur that increases costs above the original estimates. If estimates are rarely exceeded, the estimating method should be reviewed because the estimates are too high. It is impossible to predict which activities will cost more than expected, but it is reasonable to assume that some of them will. Estimating the likelihood of such events is part of risk analysis, which is discussed in more detail in a later chapter.
Instead of overestimating each cost, money is budgeted for dealing with unplanned but statistically predictable cost increases. Funds allocated for this purpose are called 1 Because it is likely that this money will be spent, it is part of the total budget for the project. If this fund is adequate to meet the unplanned expenses, then the project will complete within the budget.
If something occurs during the project that requires a change in the project scope, money may be needed to deal with the situation before a change in scope can be negotiated with the or client. It could be an opportunity as well as a challenge. For example, if a new technology were invented that would greatly enhance your completed project, there would be additional cost and a change to the scope, but it would be worth it. Money can be made available at the manager’s discretion to meet needs that would change the scope of the project. These funds are called . Unlike , they are not likely to be spent and are not part of the project’s budget baseline, but they can be included in the total project budget.2
Evaluating the Budget During the Project
A project manager must regularly compare the amount of money spent with the budgeted amount and report this information to managers and . It is necessary to establish an understanding of how this progress will be measured and reported.
Reporting Budget Progress on John’s Move
As John’s friend points out, a budget report must compare the amount spent with the amount that is expected to be spent by that point in the project. Basic measures such as percentage of activities completed, percentage of measurement units completed, and percentage of budget spent are adequate for less complex projects, but more sophisticated techniques are used for projects with higher complexity.
EARNED VALUE ANALYSIS
A method that is widely used for medium- and high-complexity projects is the method. EVM is a method of periodically comparing the budgeted costs with the during the project. It combines the scheduled activities with detailed cost estimates of each activity. It allows for partial completion of an activity if some of the detailed costs associated with the activity have been paid but others have not.
The comprises the detailed cost estimates for each activity in the project. The amount of work that should have been done by a particular date is the . These terms are used interchangeably by some sources, but the planned value term is used in formulas to refer to the sum of the budgeted cost of work up to a particular point in the project, so we will make that distinction in the definitions in this text for clarity.
Planned Value on Day Six of John’s Move
Figure 9.6 Planned Value for Lunch and Packing Materials
The is the budgeted cost of work scheduled that has been done. If you sum the BCWP values up to that point in the project schedule, you have the . The amount spent on an item is often more or less than the estimated amount that was budgeted for that item. The is the sum of the amounts actually spent on the items.
Comparing PV, EV, and AC in John’s Move on Day Six
Figure 9.7 Planned Value, Earned Value, and
The original schedule called for spending $261.65 (PV) by day six. The amount of work done was worth $162.10 (EV) according to the estimates, but the actual cost was only $154.50 (AC).
The project manager must know if the project is on schedule and within the budget. The difference between planned and actual progress is the . The schedule variance (SV) is the difference between the earned value (EV) and the planned value (PV). Expressed as a formula, SV = EV − PV. If less value has been earned than was planned, the schedule variance is negative, which means the project is behind schedule.
Schedule Variance on John’s Move
The difference between the and the is the . Expressed as a formula, CV = EV – AC. A positive CV indicates the project is under budget.
Cost Variance on John’s Move
Variance Indexes for Schedule and Cost
The schedule variance and the cost variance provide the amount by which the spending is behind (or ahead of) schedule and the amount by which a project is exceeding (or less than) its budget. They do not give an idea of how these amounts compare with the total budget.
The ratio of earned value to planned value gives an indication of how much of the project is completed. This ratio is the . The formula is SPI = EV/PV. In the John’s move example, the SPI equals 0.62 (SPI = $162.10/$261.65 = 0.62) A SPI value less than one indicates the project is behind schedule.
The ratio of the earned value to the is the . The formula is CPI = EV/AC.
Cost Performance Index of John’s Move
In the John’s move example, CPI = $162.10/$154.50 = 1.05 A value greater than 1 indicates the project is under budget.
Figure 9.8 Schedule Variance and Cost Variance on Day Six of the John’s Move Project
The cost variance of positive $7.60 and the CPI value of 1.05 tell John that he is getting more value for his money than planned for the tasks scheduled by day six. The schedule variance (SV) of negative $99.55 and the of 0.62 tell him that he is behind schedule in adding value to the project.
During the project, the manager can evaluate the schedule using the schedule variance (SV) and the and the budget using the cost variance (CV) and the cost performance index (CPI).
ESTIMATED COST TO COMPLETE THE PROJECT
Partway through the project, the manager evaluates the accuracy of the cost estimates for the activities that have taken place and uses that experience to predict how much money it will take to complete the unfinished activities of the project—the.
To calculate the ETC, the manager must decide if the cost variance observed in the estimates to that point are representative of the future. For example, if unusually bad weather causes increased cost during the first part of the project, it is not likely to have the same effect on the rest of the project. If the manager decides that the cost variance up to this point in the project is atypical—not typical—then the to complete is the difference between the original budget for the entire project—the —and the up to that point. Expressed as a formula, ETC = BAC − EV
Estimate to Complete John’s Move
If the manager decides that the cost variance is caused by factors that will affect the remaining activities, such as higher labour and material costs, then the needs to be adjusted by dividing it by the cost performance index (CPI). For example, if labour costs on the first part of a project are estimated at $80,000 (EV) and they actually cost $85,000 (AC), the cost variance will be 0.94. (Recall that the cost variance = EV/AC).
To calculate the assuming the cost variance on known activities is typical of future cost, the formula is ETC = (BAC – EV)/CPI. If the of the project is $800,000, the estimate to complete is ($800,000 – $80,000)/0.94 = $766,000.
ESTIMATE FINAL PROJECT COST
If the costs of the activities up to the present vary from the original estimates, it will affect the total for the project cost. The new of the project cost is the at completion (EAC). To calculate the EAC, the is added to the of the activities already performed. Expressed as a formula, EAC = AC + ETC.
Estimate at Completion for John’s Move
Refer to Figure 9.9 for a summary of terms and formulas.
Figure 9.9 Summary of Terms and Formulas for Earned Value Analysis
- Extra money is allocated in a contingency fund to deal with activities where costs exceed estimates. Funds are allocated in a management reserves in case a significant opportunity or challenge occurs that requires change of scope but funds are needed immediately before a scope change can typically be negotiated.
- Schedule variance is the difference between the part of the budget that has been done so far (EV) versus the part that was planned to be completed by now (PV). Similarly, the cost variance is the difference between the EV and the .
- The is the ratio of the earned value and the planned value. The cost performance index (CPI) is the ratio of the to the .
- The formula used to calculate the amount of money needed to complete the project (ETC) depends on whether or not the cost variance to this point is expected to continue (typical) or not (atypical). If the cost variance is atypical, the ETC is simply the original total budget (BAC) minus the . If they are typical of future cost variances, the ETC is adjusted by dividing the difference between BAC and EV by the CPI.
- The final budget is the to this point plus the .
 Project Management Institute, Inc., A Guide to the Project Management Body of Knowledge (PMBOK Guide), 4th ed. (Newtown Square, PA: Project Management Institute, Inc., 2008), 173.
 Project Management Institute, Inc., A Guide to the Project Management Body of Knowledge (PMBOK Guide), 4th ed. (Newtown Square, PA: Project Management Institute, Inc., 2008), 177.
Movement of the project's money.
The difference between planned and actual progress.
The ratio of earned value to planned value gives an indication of how much of the project is completed.
The ratio of the earned value to the actual cost.
Provide a unique product or service that cannot be readily purchased in the marketplace and typically provides a product or service that is designed for the project.
Money is budgeted for dealing with unplanned but statistically predictable cost increases.
The project sponsor is outside the day-to-day operations of the project and has the organizational authority to provide resources and overcome barriers for the project.
Money can be made available at the manager's discretion to meet needs that would change the scope of the project.
those who have a share or interest in the organization.
A method of periodically comparing the budgeted costs with the actual costs during the project.
Comprises the detailed cost estimates for each activity in the project.
Amount of work that should have been done by a particular date.
Budgeted cost of work scheduled that has been done.
Sum the budgeted cost of work performed at a specified point in the project schedule.
The difference between the earned value and the actual cost.
The manager evaluates the accuracy of the cost estimates for the activities that have taken place and uses that experience to predict how much money it will take to complete the unfinished activities of the project.
An educated guess based on knowledge, experience, and inference.
The estimate to complete is the difference between the original budget for the entire project.